Functional safety technical resource

What Is a Basic Process Control System (BPCS)?

A Basic Process Control System (BPCS) controls routine process operation by responding to process and operator inputs. In functional-safety work, it is distinct from the Safety Instrumented System (SIS): a BPCS is not automatically the SIF for which a safety integrity level is claimed.

BPCS and SIS have different roles

The BPCS helps operate the process within intended conditions through control loops, alarms, and operator interfaces. The SIS performs defined protective actions for allocated hazardous scenarios. The distinction prevents normal control capability from being mistaken for the documented safety function required for a particular risk claim.

Protection-layer credit requires evidence

A BPCS alarm, control action, or operator response may be considered in a risk analysis only when its effectiveness, response assumptions, and independence are supported by the project’s selected methodology. It should not be treated as interchangeable with a SIF because it uses similar field equipment.

Shared dependencies need deliberate review

Shared sensing, power, communications, logic, human interfaces, maintenance practices, or configuration paths can affect independence. These interfaces should be documented and evaluated as part of the design basis and whenever modifications are proposed.

Mangan SIS project context

Apply the term to the documented safety function

Keep BPCS–SIS interfaces explicit in the SRS, cause-and-effect documentation, architecture, and change process. Mangan SIS can support functional-safety engineering, integration and configuration, and project execution within the approved scope.

Sources and scope

Use the source type that fits the decision

Standards

IEC 61511-1:2016+AMD1:2017 and the relevant ANSI/ISA adoption provide the process-industry lifecycle framework for this concept.

Guidance

IEC 61511 Parts 2 and 3 and applicable ISA-84 technical material provide guidance that must be applied to the documented project context.

Regulation

For OSHA PSM-covered processes, process safety information includes safety systems and PHAs address controls and their interrelationships. OSHA does not make a BPCS a substitute for a required SIF.

Mangan recommendation

Use the approved SRS, hazard and risk analysis, design basis, operating data, test records, and management-of-change process to make project-specific decisions.

Common questions

Clarifying the term

Can a BPCS be credited in risk analysis?

Potentially, but only when the project methodology and documented assumptions support that credit.

Can BPCS and SIS share equipment?

It depends on the architecture, interface, independence requirements, and evidence. It should not be assumed.

Is every alarm an independent protection layer?

No. The credited role depends on the selected risk method and evidence supporting effectiveness and independence.

Need application-specific context?

Discuss the requirements, evidence, or field work behind your safety function.

Contact Mangan SIS

Downloadable term reference

Download: Basic Process Control System (BPCS) — Functional Safety Glossary PDF

Save or share this term-specific reference, including the answer-first definition, engineering review considerations, and primary-source references.

Download the Basic Process Control System (BPCS) PDF
Scroll to Top